I have revised Step 2 of my guide to address the names of Program Files folders in different languages:

viewtopic.php?f=84&t=6054&p=79588#p79588

George

George,

I did several tests this weekend with the future pinball. I did all the procedure described by you in these thread above and it did not work. I formatted and installed a fresh version of windows 10 and the future continued with the same problems. So i tested the exes of future pinball:

1. Work without problems: 2.0, 2.1 , 2.2, 2.3
2. Work with problem in render: I have a cab and the playfield not render. it´s render the machine not playfield.
3. exe 2.5 - Not worked
exe 2.5 (alt) - work whitout problems
4. other exe did not work (2,5 R2 - 2,5 slam - 2.6 - 2.6 e Zedpinball)

So until I can find the error I will use version 2.5 (alt).

Thanks in advance

Well at least you found something that works. What version of Windows are you using? When you say that the playfield does not render, it sounds like you may be running out of memory although I don't see why the 2.5 alternate would be any better that the other exes.

George

Windows 10 - 64 bits

Sorry, but I explained it wrong. I have a CAB and the playfield is a display 1 and backglass display 2. In my video preferences is uncheck render the game room. All exe that i test and work i dont have problem with playfield, but the future exe 2.4 show to me in display 1 the game room with the table not the playfield even with the video preferences is uncheck render the game room.