GoPinball.com
http://www.gopinball.com/forum/

VPX BAM headtracking tables scaling
http://www.gopinball.com/forum/viewtopic.php?f=86&t=11907
Page 1 of 1

Author:  leinfer [ Wed Jul 24, 2019 4:53 pm ]
Post subject:  VPX BAM headtracking tables scaling

Hi all

After setting up my cabinet with BAM+Kinect v2 (I can't thanks enough ravarcade for this!) I'm testing VPX BAM Headtracking.
After following https://www.youtube.com/watch?v=g-EpTp_3wKo and http://gopinball.com/forum/viewtopic.php?p=91552#p91552 instructions, the VPX tables are successfully rendered with BAM Kinect v2 headtracking, but the table Y scale is very small and I can't find any scale setting in order to fit table in the screen. Please check these pictures:

Image

Image

Any ideas? I've read the changelog.txt file from the VPVR and says "Scaling of the table is now possible in VR settings" but change those values doesn't affect the table size.

Thanks in advance and regards.

Author:  leinfer [ Tue Jul 30, 2019 3:42 pm ]
Post subject:  Re: VPX BAM headtracking tables scaling

Hi all. After several trial&error tests, I've found that the main problem is the monitor orientation. While in the Rafal Youtube's demo video shows that his monitor is in portrait mode -hence he doesn't needs to rotate the emulation-, mine is in landscape mode and rotated 270ยบ all emulation software.
After change the monitor to portrait mode in Windows and set rotation to 0 in all emulation software, tables are shown in VPX with headtracking at *almost* all screen, so it still left a few centimeters to fit the whole screen. It's more playable but still there is some room to improvement (and yes, I've tried debug mode with F6 but it doesn't work with headtracking tables)
Image

Hope it helps while still researching to how to make the VPX headtracking fit as good as BAM Future Pinball. Cheers.

Author:  GeorgeH [ Tue Jul 30, 2019 4:34 pm ]
Post subject:  Re: VPX BAM headtracking tables scaling

Can you not adjust the video to fit your screen using BAM's "Static Cam" menu?

I don't have a pincab but it doesn't seem like it should make any difference if you set Windows to portrait and set FP to 0 degrees or use Windows landscape and set FP to 270 degrees. I guess it does though.

George

Author:  leinfer [ Wed Jul 31, 2019 1:38 am ]
Post subject:  Re: VPX BAM headtracking tables scaling

GeorgeH wrote:
Can you not adjust the video to fit your screen using BAM's "Static Cam" menu?

I don't have a pincab but it doesn't seem like it should make any difference if you set Windows to portrait and set FP to 0 degrees or use Windows landscape and set FP to 270 degrees. I guess it does though.

George


Hi. There's no "Static Cam" menu in VPX like Future Pinball's BAM, or at least I couldn't find it. A 'Q' menu would be great, though.

Author:  GeorgeH [ Wed Jul 31, 2019 2:21 am ]
Post subject:  Re: VPX BAM headtracking tables scaling

Sorry, I missed reading "VPX" in your first post. Unfortunately, I don't know anything about VPX. You might send Ravarcade a private message.

George

Author:  leinfer [ Wed Jul 31, 2019 2:45 pm ]
Post subject:  Re: VPX BAM headtracking tables scaling

Thanks GeorgeH, will do. After ten days, I'm starting to banging my head against the wall trying to make it works :?

Author:  Erasmuz [ Tue Apr 21, 2020 1:09 pm ]
Post subject:  Re: VPX BAM headtracking tables scaling

Was there ever a solution to this? I am experiencing the same issues. I did notice that even though the F6 menu doesn't show, it is there. It seems like the only variable you can change is the inclination though (no X/Y scale).

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/